{"id":9704,"date":"2022-08-24T15:12:59","date_gmt":"2022-08-24T14:12:59","guid":{"rendered":"http:\/\/www.freedmr.uk\/?page_id=9704"},"modified":"2022-10-03T18:19:17","modified_gmt":"2022-10-03T17:19:17","slug":"pi-star-repeater-dial-a-tg","status":"publish","type":"page","link":"https:\/\/www.freedmr.uk\/index.php\/pi-star-repeater-dial-a-tg\/","title":{"rendered":"Pi-Star Repeater Dial-a-TG"},"content":{"rendered":"

Pi-Star Repeater Dial-a-TG
\n<\/span><\/b><\/p>\n

Step 3 \u2013 Pi-STar Repeaters (6 Dig ID)<\/strong><\/span><\/h5>\n

Via Pi-Star DMR Gateway and Dial-a-TG.
\nOnly Repeater 6 DIG IDs can use the setting below.
\nGateways 7 DIG IDs join as Hotspot<\/a> or contact us to be listed under Repeaters.<\/em><\/p>\n

To make Repeaters easy to access for users on the FreeDMR Network<\/span><\/h5>\n

All users will need in the radio is two channels.
\nTG 9 on Slot 1\u00a0\u00a0 =\u00a0\u00a0 Local RF
\nTG 9 on Slot 2\u00a0\u00a0 =\u00a0\u00a0 Dial-a-TG<\/p>\n

All other Talk Groups are blocked, unless using Dial-a-TG<\/a> on TG 9 Slot 2<\/p>\n

This is the option we would like all repeaters to use.\u00a0 Easy to use for end users.<\/p>\n

It is recommended you use DMR GW<\/p>\n

Configuration page set to DMR Gateway<\/strong> and then click on apply.<\/strong>\"\"
\nNothing else in this section is required.<\/p>\n

Then via “Configuration – Expert –\u00a0 Full Edit:\u00a0<\/strong> DMR GW”
\n\"\"
\n<\/strong>Swap out [DMR Network 1] below.<\/p>\n

Dial-a-tg
\n<\/span><\/h5>\n

This lets users call Dial-a-TG<\/a> on TG9 Slot 2, via Private Call<\/strong> or Group Call<\/strong>.<\/p>\n

If you want to<\/span><\/h5>\n

Add One<\/strong> Static Talk Group on Slot 1 see yellow line<\/span>. (No static talk groups should be used on Slot 2)<\/em>
\nAdd Cluster to TG9 Slot 1, see orange line<\/span>.<\/p>\n

[DMR Network 1]
\nEnabled=1
\nName=FreeDMR UK
\nAddress=repeater.uk.freedmr.link
\nPort=62031
\nTypeRewrite=2,80,2,80,9909<\/span>
\nTypeRewrite=2,9991,2,9991,16767223<\/span>
\nTGRewrite=2,9,2,9,1
\nTGRewrite=1,9990,1,9990,1<\/span>
\nTGRewrite=2,9990,2,9990,1
\n# TGRewrite=1,9,1,2359,1<\/span>
\n<\/span># TGRewrite=1,23510,1,23510,1 \u00a0 \u00a0 \u00a0 \u00a0\u00a0 # Radios should add as channel on Slot 1<\/span>
\nPassAllPC=1
\nPassAllPC=2
\nPassword=passw0rd
\nDebug=0
\nId=
\n# Options=”TS1=2359<\/span>,23510<\/span>;DIAL=2350<\/span>;TIMER=10;VOICE=1;”
\nLocation=0<\/p>\n

All other Talk Groups are blocked, unless using Dial-a-TG on TG 9 Slot 2
\nRepeater Dial-a-TG Options Calculator<\/a><\/p>\n

Now click on apply<\/strong>.
\nFrom now on you make all changes in Full<\/span> Edit<\/span>:\u00a0 DMR GW<\/strong>. <\/span>
\nDO NOT use the Configuration or the Quick Edit DMR GW to make changes.<\/span>
\n\"\"<\/em><\/p>\n

If running more than one network. You will need to rewrite<\/a> your own rules for Dial-a-TG<\/a> and Talk Groups.<\/em><\/p>\n

Step<\/span> 4<\/strong><\/span><\/h5>\n

That is you all set-up on FreeDMR UK<\/a><\/p>\n

 <\/p>\n

\"\"<\/a><\/p>\n

Table –<\/span><\/h5>\n

Magenta<\/span> lets you call a Talk Group on “Dia-a-TG<\/a>” via a Group call<\/strong>.
\nThis means all types of radios can use Dial-a-TG either via Private Call<\/strong> or Group Call<\/strong>. (This only works via TG9 Slot 2 and Dial-a-TG)
\n<\/em>This is the option we would like all repeaters to use down the line.\u00a0 Simple and easy to use for end users.<\/p>\n

Blue<\/span> is to let Group Call 9990<\/strong> Echo<\/a> pass.
\nCan be either from a Channel set to Group Call<\/strong>, or via Manual Dial Group Call<\/strong>.
\n(Remember, the 1st PTT only opens Echo, and it is the 2nd PTT when you speak goes to Echo and Back to you.)<\/em><\/p>\n

Orange<\/span> is Cluster via TG9 Slot 1. (Example 2359)<\/em>
\nIf you want true local only, leave out section and use TG9. TGRewrite=1,9,1,2359,1 and TS1=2359;<\/em><\/p>\n

Yellow<\/span> shows what is static (23510) on Slot 1
\nIf you want true local only, leave out section and use TG9. TGRewrite=1,23510,1,23510,1 and TS1=23510;
\n<\/em><\/p>\n

Green<\/span> <\/span>shows what the default Dial-a-TG<\/a> is set as.<\/p>\n

Options<\/span><\/h5>\n

Repeater Dial-a-TG Options Calculator<\/a>. \u00a0\u00a0 Options Explanation.<\/a><\/p>\n

Get<\/span> Status<\/b><\/span><\/h5>\n

To enquire about the Talk Group linked. Manual Dial 5000 Private Call or Group Call<\/b>, PTT and the repeater will respond with the currently linked Talk Group.<\/p>\n

Users<\/span><\/h5>\n

Can go to any Talk Group on the FreeDMR network via Slot 2 – TG 9 and Dial-a-TG.<\/a>
\nNo more rebuilding code plugs when they wish to use a New Talk Group.\u00a0\u00a0\u00a0\u00a0\u00a0 Just manual dial them.
\nRepeater is split into two and users do not need to think about what Talk Group goes on what slot.
\nSlot 1 = Local
\nSlot 2 = Network<\/p>\n

As all traffic is on TG 9.
\nUsers will never miss any traffic on the repeater as they did not have a Talk Group added to their code plug.
\nSimple and easy to use.<\/p>\n

APRS and SMS Text<\/span><\/h5>\n

Can be done on Slot 1 or Slot 2.
\nD-APRS<\/a>
\nSMS Messages<\/a>
\n<\/b><\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

Pi-Star Repeater Dial-a-TG Step 3 \u2013 Pi-STar Repeaters (6 Dig ID) Via Pi-Star DMR Gateway and Dial-a-TG. Only Repeater 6 DIG IDs can use the setting below. Gateways 7 DIG IDs join as Hotspot or contact us to be listed under Repeaters. To make Repeaters easy to access for users on the FreeDMR Network All … <\/p>\n

Continue reading “Pi-Star Repeater Dial-a-TG”<\/span><\/a><\/p>\n","protected":false},"author":4,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_lmt_disableupdate":"no","_lmt_disable":""},"_links":{"self":[{"href":"https:\/\/www.freedmr.uk\/index.php\/wp-json\/wp\/v2\/pages\/9704"}],"collection":[{"href":"https:\/\/www.freedmr.uk\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.freedmr.uk\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.freedmr.uk\/index.php\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.freedmr.uk\/index.php\/wp-json\/wp\/v2\/comments?post=9704"}],"version-history":[{"count":20,"href":"https:\/\/www.freedmr.uk\/index.php\/wp-json\/wp\/v2\/pages\/9704\/revisions"}],"predecessor-version":[{"id":10142,"href":"https:\/\/www.freedmr.uk\/index.php\/wp-json\/wp\/v2\/pages\/9704\/revisions\/10142"}],"wp:attachment":[{"href":"https:\/\/www.freedmr.uk\/index.php\/wp-json\/wp\/v2\/media?parent=9704"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}